Skip to content

Genuine Samsung parts · Fast shipping Australia-wide

0 items in cart

Cart

Your cart is empty.

Samsung Jet Vacuum Keeps Stopping or Pulsing? How to Fix It

· SpareFix

A frustrated person holding a cordless stick vacuum that has stopped working

Your Samsung Jet vacuum starts fine, then pulses, surges or cuts out completely. It's frustrating, but in most cases the vacuum is protecting its motor from a problem that's easy to fix.

1. Check for blockages

A blockage is the most common cause. Detach the tube and brush head and check each part separately:

  • Look through the extension tube for anything stuck inside.
  • Check the brush head inlet and the neck where it connects.
  • Check the dustbin inlet on the vacuum body.

2. Empty the dustbin and clean the filters

A full dustbin or clogged filter restricts airflow, and the vacuum may pulse or shut down to protect itself. Empty the bin, clean the cyclone mesh, and clean the filters as your user manual describes. Make sure any washed parts are completely dry before refitting.

3. Check the brush roller

Hair and thread wrapped around the brush roller can stop it turning, which may cause the brush or vacuum to stop. Remove the roller if your model allows and clear the tangles.

4. Check the battery

If the vacuum cuts out after a short time even when everything is clean, the battery may be wearing out. See our guide: Signs It's Time for a Replacement Battery.

5. Still not working?

If the problem continues after these checks, a part such as the brush head, handle assembly or motor may need attention. Check your vacuum's model number and the user manual, or get in touch and tell us what's happening.

Browse our Samsung vacuum parts for filters, brushes, tubes and batteries.