Samsung TV Won't Turn On? Power Cord, Power Board and What to Check
· SpareFix
You press the power button and nothing happens. Before assuming the worst, it's worth working through a few checks. Many "dead" TVs turn out to have a simple fault with the power cord, the remote, or a single board inside.
1. Check the basics
- Try a different power point and remove any power board or surge protector to rule it out.
- Check the power cord for damage and make sure it's pushed firmly into the TV. A damaged or lost cord is an easy, low-cost fix.
- Try the power button on the TV itself, not just the remote. If the TV turns on, the remote is the problem.
- Unplug the TV for a few minutes, then plug it back in and try again.
2. Look at the standby light
Most Samsung TVs have a small standby light. What it does can help narrow things down:
- No light at all: the TV may not be getting power. Check the cord and power point, then suspect the power board.
- Light on, but the TV won't start: power is reaching the TV, so the fault may be in the power board, main board or remote.
- Light blinking: the TV is trying to start but something is stopping it. This often needs a closer look by a technician.
3. Power board faults
The power board converts mains power for the rest of the TV. When it fails, the TV may not turn on, may click on and off, or may turn on with sound but no picture. Power boards are specific to the TV model, so check the part number printed on your old board, usually starting with BN44.
Safety first
TV power boards carry mains voltage and can hold a charge after being unplugged. If you're not experienced with electronics, leave internal repairs to a qualified technician.
Find the right part
Browse our TV power cords and TV power boards, or search with your model or part number. We also offer Samsung repairs, so get in touch if you'd rather we take a look.