Skip to content

Genuine Samsung parts · Fast shipping Australia-wide

0 items in cart

Cart

Your cart is empty.

Vacuum Brush Roll Not Spinning or Tangled With Hair? How to Fix It

· SpareFix

A vacuum brush roller tangled with hair next to a pair of scissors

If your vacuum is leaving debris behind, or the brush has stopped spinning, the roller (often called the drum brush) is the first place to look. Hair, thread and pet fur build up over time and can slow or stop the roller completely.

How to clear a tangled roller

  1. Turn the vacuum off and remove the battery or unplug it.
  2. Remove the brush head from the vacuum.
  3. Take out the roller if your model allows. Many Samsung brush heads have a release button or cover.
  4. Cut through the tangles carefully with scissors, cutting along the roller rather than across the bristles, then pull the hair away.
  5. Check the end caps, where hair often hides and can stop the roller turning.
  6. Refit the roller and make sure it's locked in place.

Still not spinning?

  • Check for a blockage in the brush head's neck or inlet.
  • Check the brush head is clicked fully onto the tube, as motorised heads need a good connection to get power.
  • Some vacuums stop the brush to protect the motor when it's jammed. Clear the jam and restart.

When to replace the roller

Replace the drum brush if the bristles are worn flat, the soft roller is damaged, or the roller is cracked or warped. A worn roller picks up much less dirt. If the motorised brush head itself has failed, you may need a whole new brush head.

Find the right part

Drum brushes are specific to the brush head type and vacuum model. Browse our drum brushes and vacuum heads, and check the listing names your vacuum model.